Modern blackout curtain, blackout, matt, light grey

Special Price €36.91
/ pcs. Regular Price €43.52
The lowest price in the last 30 days: €33.92
(as for height 220cm, width 70cm, mat. 150cm)
Fabric price €10.29 /lm. €14.70

Choose for your own window:

Choose top finish

for clips, hooks, gathering tape no. 1

  • Fold ratio 1:2
  • Height of the pleat tape: 5cm
  • Fitting with hooks, clips and sliders

How to measure the height for this pleat:

pomiar-karnisz.jpg

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the drape to hang above the floor. Enter the resulting value into the height field.

Description:

The tape arranges the fabric in folds in a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, creased drape). Tape height: 5 cm. For this tape it is possible to fit hooks (clip pins) in two different places, in this way it is possible to adjust the height by approx. 1 cm.

for clips, hooks, with frill, gathering tape no. 3

  • Fold ratio 1:2,5
  • Height of the pleat tape: 5 cm
  • Frill height approx. 4/5 cm (cover the clips)
  • Fitting with hooks, clips and sliders

How to measure the height for this pleat:

pomiar-karnisz.jpg

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the curtain to hang above the floor. Enter the resulting value into the height field.

Description:

This pleating tape is commonly referred to as a "pencil tape". The tape arranges the fabric into creases at a ratio of 1:2.5 (2.5 linear metres of fabric are required for 1 metre of finished, pleated drape). Height of the tape: 5 cm. With this pleating tape, it is possible to attach hooks (clips, sliders) at two different points so that the height can be adjusted by approx. 1 cm. The frill above the tape is 4/5 cm high.

for curtain rod, rod pocket no. 5

  • Fold ratio 1:2
  • Height of the pleat tape: 10 cm
  • Mounted directly on the curtain pole

How to measure the height for this pleat:

pomiar-tunel.jpg

Measure the height from the top of the curtain rod to the floor (or windowsill). In the case of braces, this height should be entered in the measurement field, so that the drape hangs approx. 2 cm above the floor.

Description:

The pleated tape commonly referred to as "braces". At the top the tape organises the fabric into even pleats, which are usually aligned in this way all the way to the bottom. The tape arranges the pleats in a ratio of 1:2 (2 linear metres of fabric are required for 1 metre of finished pleated drape). Height of the tape: 10 cm.

for curtain rod, rod pocket no. 6

  • Fold ratio 1:2
  • Height of the tunnel: 5 cm
  • Mounted directly on the curtain pole

How to measure the height for this pleat:

pomiar-tunel.jpg

Measure the height from the top of the curtain pole to the floor (or windowsill). Then subtract approx. 2 cm from the measured height - the curtain will then hang approx. 2 cm above the floor (if you want it shorter - subtract 3-4 cm from the measurement). Enter the calculated value in the input field for the height.

Description:

With „Tunnel” the fabric is arranged in irregular folds. The tunnel made of stitched fabric is inserted onto the curtain pole and the fabric folds itself due to the double amount of fabric. Tunnel height approx. 5 cm.

for curtain rod, with frill, rod pocket no. 7

  • Fold ratio 1:2
  • Height of the tunnel: 5 cm, frill: 3/4 cm
  • Mounted directly on the curtain pole

How to measure the height for this pleat:

pomiar-tunel.jpg

Measure the height from the top of the curtain pole to the floor (or windowsill). Then subtract approx. 2 cm from the measured height - the drape will then hang approx. 2 cm above the floor (if you want it shorter - subtract 3-4 cm from the measurement). Enter the calculated value in the input field for the height.

Description:

With "Tunnel", the fabric is arranged in irregular folds and there is a frill about 5 cm high above the tunnel. The tunnel made of stitched fabric is inserted onto the drape pole and the fabric folds itself due to the double amount of fabric. Tunnel height approx. 5 cm and additional frill approx. 3/4 cm high.

for track, Wave, no sliders, Band No. 8

  • Already have a track with the Wave system sliders inserted? This top finish of the drape will suit you.
  • Drape supplied with the Wave band sewn in and the snails inserted into the band (but without sliders).

How to measure the height for this top finish?

pomiar-szyna.jpg

Measure the height from the eyelet to the floor (or windowsill). Then subtract 2 cm from the measured height. Enter this value in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2.3 (2.3 linear metres of fabric are needed for 1 metre of finished, wrinkled drapes). It is possible to attach hooks to the band in two different places, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

for track, Wave, sliders included, Band No. 13

  • You already have a track, without sliders, and want a drape arranged in beautiful Wave waves? This top finish of the drape will suit you.
  • Drape supplied with the Wave band sewn in, snails inserted into the band and sliders (connected by cord).
  • is your track suitable for these sliders? Do a coin test (see ‘Description’ below)

How to measure the height for this top finish?

pusta-szyna.jpg

Measure the height from the bottom of the track to the floor (or windowsill). Then subtract 3 cm from the measured height. Enter the value so calculated in the height measurement field.

Description:

The width of the track gap should be between 6.0 and 6.5 mm. This can easily be checked using coins. Three 10-cent coins should fit into the track slot (as shown in the photo gallery at the top). The band gathers the fabric into folds at a ratio of 1:2.3 (2.3 running metres of fabric are needed for 1 metre of finished, wrinkled drape). Hooks are clipped into the band, which can be clipped in two positions, allowing height adjustment of approx. 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem in the corners of the drape. Included with the drape is an appropriate number of round-headed sliders, (connected by a cord), to be inserted into the track.

for track with hooks, Band No. 9

  • Have you got a track with hooks? This top finish of the drape will suit your track.
  • The band beautifully lines up the fabric, as shown in the picture
  • drape supplied with the band sewn in

How to measure the height for this top finish?

pomiar-szyna.jpg

Measure the height from the hook to the floor (or window sill). Then subtract 2 cm from the measured height. Enter the value calculated in this way in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, wrinkled drapes). It is possible to attach hooks to the band at two different points on the band, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

for eyelet track, Band No. 12

  • Have you got an eyelet track? This top finish of the drape will suit your track.
  • The band gathers the fabric beautifully, as shown in the picture
  • drape supplied with the band sewn in and the snails inserted into the band (to be inserted into eyelets)

How to measure the height for this top finish?

pomiar-szyna.jpg

Measure the height from the eyelet to the floor (or window sill). Then subtract 2 cm from the measured height. Enter the value calculated in this way in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, gathered drape). It is possible to attach hooks to the band in two different places, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

Heading /Top-Finish pleat tape, no. 9

  • Fold ratio 1:2,5
  • Height of the pleat tape: 7,5 cm
  • Frill height approx. 4/5 cm (cover the clips)
  • Fitting with hooks, clips and sliders

How to measure the height for this pleat:

pomiar-karnisz.jpg

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the curtain to hang above the floor. Enter the resulting value into the height field.

Description:

This pleating tape is commonly referred to as a "pencil tape". The tape arranges the fabric into creases at a ratio of 1:2.5 (2.5 linear metres of fabric are required for 1 metre of finished, pleated curtain). Height of the tape: 5 cm. With this pleating tape, it is possible to attach hooks (clips, sliders) at two different points so that the height can be adjusted by approx. 1 cm. The frill above the tape is 4/5 cm high.

Set desired dimensions

A cm
B cm
material total width -- cm
In stock
SKU
z1171-2-290
--,--
Blackout blackout drape fabric.
Special

Modern curtains for draping, tailor-made from Blackout fabric in light grey. They cover the window very well and do not let in too much light, while shading the room. This ensures that we can relax, even when the sun is shining strongly outside or the light from streetlights comes in through the window. They perfectly arrange themselves in even waves without any unnecessary effort. They will look great in the living room, dining room and bedroom when combined with decorated curtains. Top quality - iDESCU premium collection.

Colour: Light grey Material: 100% Polyester Weight: 240g/m2

Every effort is made to ensure that the colours shown on the screens match the real ones as closely as possible. However, due to the different types of displays in phones, these may differ from the actual colours of the materials.

They are ideal for classic and modern interiors as well as those decorated in industrial and Scandinavian styles.

Cleaning, maintenance: By following the maintenance instructions you can be sure that the curtains will not shrink after washing. Iron at temperatures up to 100 degrees C.


More Information
Colour black-gray
Transparency of the material for blackout
Type of materials soft materials, matt materials, two-sided materials
Write Your Own Review
You're reviewing:Modern blackout curtain, blackout, matt, light grey
Your Rating

In the free iDESCU app, you can see how the z1171-2-290 fabric drape will look in your interior, presented against a photo of your window.

Download app iDESCU from:

Download from google play store Download from Apple appstore

More about the iDESCU app

use iDESCU app

use iDESCU app

take a picture of your window...

take a picture of your window...

visualisation of a Roman blind against a photo of the window

visualisation of a Roman blind against a photo of the window

visualisation of a curtain-panel against a photo of the window

visualisation of a curtain-panel against a photo of the window

take a picture of your window...

take a picture of your window...

visualisation of a drape against a photo of the window

visualisation of a drape against a photo of the window

visualisation of a curtain against a photo of a window

visualisation of a curtain against a photo of a window

visualisation of a drape and curtain against a picture of a window

visualisation of a drape and curtain against a picture of a window

magnifying glass icon - zoom in on details in the iDESCU app

magnifying glass icon - zoom in on details in the iDESCU app

© 2025 iDESCU. All rights reserved.