beige linen drapes, curtains natural linen, linen drape curtains, linen curtains

Choose top finish

for curtain track, hooks, gathering tape no. 9

for curtain track, Wave with sliders, gathering tape no. 13

for curtain track, gathering tape no. 8

for curtain track, hooks, gathering tape no. 12

for clips, hooks, gathering tape no. 1

for clips, hooks, with frill, gathering tape no. 3

for curtain rod, rod pocket no. 5

for curtain rod, rod pocket no. 6

for curtain rod, with frill, rod pocket no. 7

for clips, hooks, gathering tape no. 1

Fold ratio 1:2
Height of the pleat tape: 5cm
Fitting with hooks, clips and sliders

How to measure the height for this pleat:

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the drape to hang above the floor. Enter the resulting value into the height field.

Description:

The tape arranges the fabric in folds in a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, creased drape). Tape height: 5 cm. For this tape it is possible to fit hooks (clip pins) in two different places, in this way it is possible to adjust the height by approx. 1 cm.

for clips, hooks, with frill, gathering tape no. 3

Fold ratio 1:2,5
Height of the pleat tape: 5 cm
Frill height approx. 4/5 cm (cover the clips)
Fitting with hooks, clips and sliders

How to measure the height for this pleat:

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the curtain to hang above the floor. Enter the resulting value into the height field.

Description:

This pleating tape is commonly referred to as a "pencil tape". The tape arranges the fabric into creases at a ratio of 1:2.5 (2.5 linear metres of fabric are required for 1 metre of finished, pleated drape). Height of the tape: 5 cm. With this pleating tape, it is possible to attach hooks (clips, sliders) at two different points so that the height can be adjusted by approx. 1 cm. The frill above the tape is 4/5 cm high.

for curtain rod, rod pocket no. 5

Fold ratio 1:2
Height of the pleat tape: 10 cm
Mounted directly on the curtain pole

How to measure the height for this pleat:

Measure the height from the top of the curtain rod to the floor (or windowsill). In the case of braces, this height should be entered in the measurement field, so that the drape hangs approx. 2 cm above the floor.

Description:

The pleated tape commonly referred to as "braces". At the top the tape organises the fabric into even pleats, which are usually aligned in this way all the way to the bottom. The tape arranges the pleats in a ratio of 1:2 (2 linear metres of fabric are required for 1 metre of finished pleated drape). Height of the tape: 10 cm.

for curtain rod, rod pocket no. 6

Fold ratio 1:2
Height of the tunnel: 5 cm
Mounted directly on the curtain pole

How to measure the height for this pleat:

Measure the height from the top of the curtain pole to the floor (or windowsill). Then subtract approx. 2 cm from the measured height - the curtain will then hang approx. 2 cm above the floor (if you want it shorter - subtract 3-4 cm from the measurement). Enter the calculated value in the input field for the height.

Description:

With „Tunnel” the fabric is arranged in irregular folds. The tunnel made of stitched fabric is inserted onto the curtain pole and the fabric folds itself due to the double amount of fabric. Tunnel height approx. 5 cm.

for curtain rod, with frill, rod pocket no. 7

Fold ratio 1:2
Height of the tunnel: 5 cm, frill: 3/4 cm
Mounted directly on the curtain pole

How to measure the height for this pleat:

Measure the height from the top of the curtain pole to the floor (or windowsill). Then subtract approx. 2 cm from the measured height - the drape will then hang approx. 2 cm above the floor (if you want it shorter - subtract 3-4 cm from the measurement). Enter the calculated value in the input field for the height.

Description:

With "Tunnel", the fabric is arranged in irregular folds and there is a frill about 5 cm high above the tunnel. The tunnel made of stitched fabric is inserted onto the drape pole and the fabric folds itself due to the double amount of fabric. Tunnel height approx. 5 cm and additional frill approx. 3/4 cm high.

for track, Wave, no sliders, Band No. 8

Already have a track with the Wave system sliders inserted? This top finish of the drape will suit you.
Drape supplied with the Wave band sewn in and the snails inserted into the band (but without sliders).

How to measure the height for this top finish?

Measure the height from the eyelet to the floor (or windowsill). Then subtract 2 cm from the measured height. Enter this value in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2.3 (2.3 linear metres of fabric are needed for 1 metre of finished, wrinkled drapes). It is possible to attach hooks to the band in two different places, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

for track, Wave, sliders included, Band No. 13

You already have a track, without sliders, and want a drape arranged in beautiful Wave waves? This top finish of the drape will suit you.
Drape supplied with the Wave band sewn in, snails inserted into the band and sliders (connected by cord).
is your track suitable for these sliders? Do a coin test (see ‘Description’ below)

How to measure the height for this top finish?

Measure the height from the bottom of the track to the floor (or windowsill). Then subtract 3 cm from the measured height. Enter the value so calculated in the height measurement field.

Description:

The width of the track gap should be between 6.0 and 6.5 mm. This can easily be checked using coins. Three 10-cent coins should fit into the track slot (as shown in the photo gallery at the top). The band gathers the fabric into folds at a ratio of 1:2.3 (2.3 running metres of fabric are needed for 1 metre of finished, wrinkled drape). Hooks are clipped into the band, which can be clipped in two positions, allowing height adjustment of approx. 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem in the corners of the drape. Included with the drape is an appropriate number of round-headed sliders, (connected by a cord), to be inserted into the track.

for track with hooks, Band No. 9

Have you got a track with hooks? This top finish of the drape will suit your track.
The band beautifully lines up the fabric, as shown in the picture
drape supplied with the band sewn in

How to measure the height for this top finish?

Measure the height from the hook to the floor (or window sill). Then subtract 2 cm from the measured height. Enter the value calculated in this way in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, wrinkled drapes). It is possible to attach hooks to the band at two different points on the band, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

for eyelet track, Band No. 12

Have you got an eyelet track? This top finish of the drape will suit your track.
The band gathers the fabric beautifully, as shown in the picture
drape supplied with the band sewn in and the snails inserted into the band (to be inserted into eyelets)

How to measure the height for this top finish?

Measure the height from the eyelet to the floor (or window sill). Then subtract 2 cm from the measured height. Enter the value calculated in this way in the height measurement field.

Description:

The band gathers the fabric into folds at a ratio of 1:2 (2 running metres of fabric are needed for 1 metre of finished, gathered drape). It is possible to attach hooks to the band in two different places, allowing the height to be adjusted by approximately 1 cm. Bottom finishing - hemming and additionally weights inserted into the hem at the corners of the drape.

Heading /Top-Finish pleat tape, no. 9

Fold ratio 1:2,5
Height of the pleat tape: 7,5 cm
Frill height approx. 4/5 cm (cover the clips)
Fitting with hooks, clips and sliders

How to measure the height for this pleat:

The height of curtain for this pleat style shall be measured from the clip/hook to the floor (or windowsill). Then subtract 1 to 3 cm from the measured height, depending on how high you want the curtain to hang above the floor. Enter the resulting value into the height field.

Description:

This pleating tape is commonly referred to as a "pencil tape". The tape arranges the fabric into creases at a ratio of 1:2.5 (2.5 linear metres of fabric are required for 1 metre of finished, pleated curtain). Height of the tape: 5 cm. With this pleating tape, it is possible to attach hooks (clips, sliders) at two different points so that the height can be adjusted by approx. 1 cm. The frill above the tape is 4/5 cm high.

More Information
Colour	creams-beige
Transparency of the material	little transparent
Type of materials	natural materials, soft materials, matt materials

5 stars

Based on 149 reviews

Google Reviews

7 months ago

We are very satisfied with the good and fast support and delivery as well as the beautiful workmanship. We are happy to recommend IDESCU. We have ordered Roman blinds for the second time and are once again very satisfied with the quick delivery. The blinds fit perfectly and are very precisely and beautifully crafted. I highly recommend IDESCU.

Corinna Glaus

3 months ago

If you want to decorate your windows but don't have any ideas, I recommend iDESCU. I came to the store before the renovation began to see what I could use to decorate my windows, and I was surprised to leave with a pre-determined order. I've never encountered such professional and friendly service. Everything was explained, shown, and calculated step by step. I only had the measured window, and I was amazed when Ilona measured my entire order to the exact centimeters based on that. Of course, I also had to call the store to confirm the dimensions, and nothing changed. I honestly didn't think ordering curtains could be so pleasant and simple. The effect on the window exceeded my expectations. I wholeheartedly recommend this store. The customer is the most important thing. Ilona dedicates as much time as you need to each customer, and she's very responsive. The entire staff is friendly, courteous, and very professional. I recommend it.

A.K

8 months ago

I found this store thanks to the positive reviews on Google, and I can only confirm – this place truly deserves the highest rating! The service is top-notch – incredibly friendly, knowledgeable, and helpful. The advice on choosing curtains was professional. The wide selection of fabrics and meticulous workmanship mean I'll definitely be back. I recommend it to anyone looking for quality and excellent service!

Natalia Wojnowska

9 months ago

We highly recommend the iDESCU curtain shop! The curtains and drapes we ordered are beautiful, carefully crafted, and perfect for our interiors. The customer service is top-notch – helpful and professional. I highly recommend them. We also have a little something extra for you – a special discount code for liking or sharing this comment!

Mateusz Józef Chmielarz

2 months ago

I recommend the iDESCU store and curtains. Professional advice and high-quality service. A very large selection of high-quality curtains and drapes.

Aleksandra

A very professional approach to the customer – from selection, measurement, and completion. The friendly ladies helped me accurately calculate the dimensions – I used the chat option on the website. My order was then confirmed by phone. The curtains were perfectly sewn, the fabric is beautiful, and they actually look like they don't need ironing. The purchase is 100% worth the price, and the customer service is simply exemplary.

Magdalena Zadworna

Beige Linen Drape - Natural Elegance

Choose top finish

for clips, hooks, gathering tape no. 1

How to measure the height for this pleat:

Description:

for clips, hooks, with frill, gathering tape no. 3

How to measure the height for this pleat:

Description:

for curtain rod, rod pocket no. 5

How to measure the height for this pleat:

Description:

for curtain rod, rod pocket no. 6

How to measure the height for this pleat:

Description:

for curtain rod, with frill, rod pocket no. 7

How to measure the height for this pleat:

Description:

for track, Wave, no sliders, Band No. 8

How to measure the height for this top finish?

Description:

for track, Wave, sliders included, Band No. 13

How to measure the height for this top finish?

Description:

for track with hooks, Band No. 9

How to measure the height for this top finish?

Description:

for eyelet track, Band No. 12

How to measure the height for this top finish?

Description:

Heading /Top-Finish pleat tape, no. 9

How to measure the height for this pleat:

Description:

Decorative Side

For Covering